NZPPCC - The NZ Primera & Pulsar Car Club

General Forums => General Car Discussion => Topic started by: chrisws360 on 22 September, 2020, 02:16:00 AM

Title: GTIR 3 Gauge cluster on sr18de?
Post by: chrisws360 on 22 September, 2020, 02:16:00 AM
Heya, i have a 91 N14 GTI with a sr18de, I'm wanting to use the gtir centre gauges I have to know my oil pressure and temperature. I have got my hands on both sensors and wondering where they would fit on the sr18de motor.

Any help is appreciated!

Pic is of said GTI. Saved from the scrap heap from all my rust repairs!(https://uploads.tapatalk-cdn.com/20200921/f30139df1e4493ac01296cec97ca6cf6.jpg)(https://uploads.tapatalk-cdn.com/20200921/e7ddbc14e8961bacdde234b7d3bb9356.jpg)

Sent from my SM-G950F using Tapatalk

Title: Re: GTIR 3 Gauge cluster on sr18de?
Post by: PulsarGTI on 24 September, 2020, 01:11:09 PM
You can use the pressure sensor to replace your factory oil pressure light switch on your oil filter housing - one of the two wires on the GTIR sensor is used to switch the pressure light and the other goes to the gauge. The temp sensor is more of an issue - when I installed mine, I welded a bung into the sump for it.
Title: Re: GTIR 3 Gauge cluster on sr18de?
Post by: chrisws360 on 06 October, 2020, 09:44:57 PM
She works! Happy to explain the process to anyone if they are interested!  (https://uploads.tapatalk-cdn.com/20201006/b1ca2523cf7f0cd35b6a79e333ff4dc6.jpg)(https://uploads.tapatalk-cdn.com/20201006/d3ea510fabd6a922d8ffa4fb0d8df729.jpg)

Sent from my SM-G950F using Tapatalk