NZPPCC - The NZ Primera & Pulsar Car Club

General Forums => General Car Discussion => Topic started by: Mike Rolls on 05 September, 2020, 10:34:18 PM

Title: P11 Auto trans Control Module
Post by: Mike Rolls on 05 September, 2020, 10:34:18 PM
Hi first post. Im putting a SR20de into another vehicle. The trans has a kick down cable. My sparkie tells me i need the ECU to control the trans. I used a P11 for the doner car, not much left of it now. I cant remember whether i have lost this part or i never had it. The loom does not seem to have a plug for this. The thing is nearly running bar a wire to fire the injectors, so very close now. Shall i keep searching? Cheers MIKE
Title: Re: P11 Auto trans Control Module
Post by: grim_reaper on 07 September, 2020, 05:32:45 PM
What vehicle are you putting the P11 SR20DE into?

As far as I'm aware, the transmission is controlled by the ECU/PCM, there is no Auto trans computer.

Title: Re: P11 Auto trans Control Module
Post by: Mike Rolls on 17 October, 2020, 01:41:28 PM
Its a scratch built 4x4 trials buggy. (Trying to load a photo.) No dash, just oil and ignition light. temp gauge. A plastic box for the ECU and another plastic box for the relays and fuses.