NZPPCC - The NZ Primera & Pulsar Car Club

General Forums => General Car Discussion => Topic started by: snowballfred on 02 December, 2019, 04:34:14 AM

Title: 2000 PRIMERA HYPER CVTM6 SR20 starter removal help
Post by: snowballfred on 02 December, 2019, 04:34:14 AM
Hey pretty sure my starters gone in my car and im trying to avoid a big bill replacing it , ive located a replacement but getting to the bugger is difficult could any wonderful people advise me on how to proceed as id like to get it done this week so i can be back on the road.
Can supply pictures if required

Thanks in advance
Title: Re: 2000 PRIMERA HYPER CVTM6 SR20 starter removal help
Post by: grim_reaper on 02 December, 2019, 10:40:53 PM
They are a pretty easy starter to get out. 1st thing is disconnect the battery, remove the battery & tray. Remove the complete airbox assembly & intake hose. Unplug the small wire to the starter & the large power cable. Either 2x 14mm or 17mm bolts. Then lift the starter out of position.