Recent Posts

Pages: [1] 2 3 ... 10
1
General Car Discussion / Re: W11 gt4-z to fwd manual conversion?
« Last post by PulsarGTI on 13 November, 2021, 01:25:18 PM »
Why not use the 51A from the P12? Cable shifter rather than rods.
2
General Car Discussion / Re: W11 gt4-z to fwd manual conversion?
« Last post by scissors on 07 November, 2021, 07:49:55 AM »
OK it seems the problem is there are no cars in NZ with an SR20 mated to an RS5F70A box, so no car available in nz to get the bellhousing from. Looks like it only came in some usdm P11's and B15's.

We do have manual nzdm P11's up to 2002, but (correct me if I'm wrong) they have RS5F32A transmissions unlike their USDM counterparts.

That puts a stop to that project, was hoping it would be an easy conversion using factory OEM parts from pick a part or the like
3
General Car Discussion / Re: W11 gt4-z to fwd manual conversion?
« Last post by scissors on 03 November, 2021, 10:08:27 PM »
Well, there's a manual qg18de W11 avenir at the local pick a part
The transmission code is rs5f70a

According to the last post on this thread:
https://www.sr20forum.com/threads/rs5f70-gearbox-question.174852/
The bellhousing off a manual sr20de B15 will fit the rs5f70a box

So that could be an option but has anyone done that here? Is it an option that would work? Or is there something I'm missing?
4
General Car Discussion / W11 gt4-z to fwd manual conversion?
« Last post by scissors on 03 November, 2021, 02:45:55 PM »
I'm looking at potentially buying a w11 avenir gt4-z with 4wd auto trans and sr20det engine

If I got it I would be wanting to convert it to fwd manual

From my reading it is tricky to convert to 4wd manual as the crossmember would foul the shifter linkages, thus needing the crossmember to be modified

The only manual w11's are qg18de

Excuse my ignorance, but what are the differences in terms of layout /fitment between 4wd and fwd gearboxes? Are the shifter linkages on a fwd sr20de gearbox in a different location that would likely clear the w11 crossmember?

Is the crossmember from a sr20de auto w11 the same as a sr20det w11?
5
General Car Discussion / Re: n15 rotors...
« Last post by PulsarGTI on 12 October, 2021, 12:38:34 PM »
I have a vzr n15. I bought the gtir front rotors but supercheap has no part listing's for rear rotors. Now as mentioned vzr uses gtir front and rear rotors. Where can i buy the rear ones from?

The rear are the same as N15 Sentra/Pulsar SSS, with the SR20DE
6
General Car Discussion / Re: n15 rotors...
« Last post by 180sxnit on 09 October, 2021, 01:13:34 AM »
I have a vzr n15. I bought the gtir front rotors but supercheap has no part listing's for rear rotors. Now as mentioned vzr uses gtir front and rear rotors. Where can i buy the rear ones from?
7
General Car Discussion / Re: Anyone still around
« Last post by Dustyvvl_ on 29 September, 2021, 10:05:55 PM »
Only just got my account sorted a day ago, but I came here from the facebook group, lots of great info on here and it's been cool to see the history of the club up here!
8
Thanks man, you saved my Primera !
Got the hose done.



All is good now, no more leaks, but a terrible smoke coming from the exhaust braid as it was soaking with fluid.
After 30 mm drive, it all burned away.
The car stinks but goes great. ;)

9
General Car Discussion / Re: 2001 P11 primera heater not working
« Last post by Joe on 21 August, 2021, 01:53:29 PM »
Thanks for your answer. I found the motor controlling the flap at the heater core do not function. I got one from pick a part and plugged it in and no luck. It pushes me back to think it is the DCC. So I got one from pick a part and no luck. Replaced all temp sensors still no luck. I am about giving up.
10
Meets / Events / 2021 National Meet
« Last post by PulsarGTI on 13 August, 2021, 01:36:45 PM »
Turns out I'm totally complicit in the decline of forums, by only advertising this on Facebook until now - here's some event info for the 2021 National Meet!







Facebook event here

Pages: [1] 2 3 ... 10