« previous next »
Pages: [1]

Author Topic: P11 Auto trans Control Module  (Read 541 times)

0 Members and 1 Guest are viewing this topic.

Mike Rolls

  • Newbie
  • *
  • Posts: 2
  • Gender: Male
  • Hi There!
P11 Auto trans Control Module
« on: 05 September, 2020, 10:34:18 PM »
Hi first post. Im putting a SR20de into another vehicle. The trans has a kick down cable. My sparkie tells me i need the ECU to control the trans. I used a P11 for the doner car, not much left of it now. I cant remember whether i have lost this part or i never had it. The loom does not seem to have a plug for this. The thing is nearly running bar a wire to fire the injectors, so very close now. Shall i keep searching? Cheers MIKE
Logged


grim_reaper

  • Part of the furniture
  • *****
  • Posts: 5089
Re: P11 Auto trans Control Module
« Reply #1 on: 07 September, 2020, 05:32:45 PM »
What vehicle are you putting the P11 SR20DE into?

As far as I'm aware, the transmission is controlled by the ECU/PCM, there is no Auto trans computer.

« Last Edit: 07 September, 2020, 05:36:24 PM by grim_reaper »
Logged

Mike Rolls

  • Newbie
  • *
  • Posts: 2
  • Gender: Male
  • Hi There!
Re: P11 Auto trans Control Module
« Reply #2 on: 17 October, 2020, 01:41:28 PM »
Its a scratch built 4x4 trials buggy. (Trying to load a photo.) No dash, just oil and ignition light. temp gauge. A plastic box for the ECU and another plastic box for the relays and fuses.
Logged
Pages: [1]
« previous next »