Author Topic: 2000 PRIMERA HYPER CVTM6 SR20 starter removal help  (Read 78 times)

0 Members and 1 Guest are viewing this topic.

snowballfred

  • Newbie
  • *
  • Posts: 1
  • Gender: Male
  • Hi There!
2000 PRIMERA HYPER CVTM6 SR20 starter removal help
« on: 02 December, 2019, 04:34:14 AM »
Hey pretty sure my starters gone in my car and im trying to avoid a big bill replacing it , ive located a replacement but getting to the bugger is difficult could any wonderful people advise me on how to proceed as id like to get it done this week so i can be back on the road.
Can supply pictures if required

Thanks in advance



grim_reaper

  • Part of the furniture
  • *****
  • Posts: 5082
Re: 2000 PRIMERA HYPER CVTM6 SR20 starter removal help
« Reply #1 on: 02 December, 2019, 10:40:53 PM »
They are a pretty easy starter to get out. 1st thing is disconnect the battery, remove the battery & tray. Remove the complete airbox assembly & intake hose. Unplug the small wire to the starter & the large power cable. Either 2x 14mm or 17mm bolts. Then lift the starter out of position.