Author Topic: Wellington Tuning weekend  (Read 3321 times)

0 Members and 1 Guest are viewing this topic.

R3SPCT

  • NZPPCC Paid Member
  • Part of the furniture
  • *****
  • Posts: 5029
Wellington Tuning weekend
« on: 10 May, 2013, 05:01:33 PM »
I want to come down to Wellington soon to do recon for Nat meet, and to do some tuning while there.

Post up here if you are keen, have a few daughterboards in stock atm so can bring some with me if anyone wants a tune from scratch, or retunes to suit.

Was hoping for next weekend, but a few things got in the way of this, but def need to make it down.



N14_NEO

  • Post Whore
  • ****
  • Posts: 1365
  • Gender: Male
  • Nick
Re: Wellington Tuning weekend
« Reply #1 on: 11 May, 2013, 01:33:13 PM »
I want to come down to Wellington soon to do recon for Nat meet, and to do some tuning while there.

Post up here if you are keen, have a few daughterboards in stock atm so can bring some with me if anyone wants a tune from scratch, or retunes to suit.

Was hoping for next weekend, but a few things got in the way of this, but def need to make it down.

Hey Darryl, I can't remember if I have talked to you about this but my car has a bit of an issue: on the odd occasion when I give it a boot-full in first gear it has a massive hesitation in power when it gets to 5.5-6K. My thinking is that when the high lobe is activated the A/F mix isn't bumping up quick enough so it's leaning out. I can't be certain because the revs pull so fast in first but I'm pretty sure it's happening when the Ex. cam kicks.
I have also noticed a bit of pinking under high load/low RPM.
Lastly, I was having a bit of fun in the rain one day and gave it a punch in first and the rev cut just didn't butt in (saw the needle hit 9K!)
Just wondering if you have any thoughts on these issues and think any could be sorted with a tweak of the tune?
Also looking at a bit of exhaust work soon in preparation for the 22 so I might as well make the most of it.

R3SPCT

  • NZPPCC Paid Member
  • Part of the furniture
  • *****
  • Posts: 5029
Re: Wellington Tuning weekend
« Reply #2 on: 11 May, 2013, 05:40:31 PM »
Sounds like a retune would be a good idea. 

_impulsive

  • Unpaid Subs Members
  • Forum Lurker
  • *
  • Posts: 309
  • Gender: Male
Re: Wellington Tuning weekend
« Reply #3 on: 11 May, 2013, 07:12:05 PM »
Sweet, that was me I just forgot Nick was still signed on my computer.

JasoP11

  • Unpaid Subs Members
  • Newbie
  • *
  • Posts: 34
Re: Wellington Tuning weekend
« Reply #4 on: 11 May, 2013, 07:22:42 PM »
What are the prices? im having similar problems

smokeyp10

  • Kevin O
  • NZPPCC Paid Member
  • Forum Lurker
  • *****
  • Posts: 268
  • Gender: Male
Re: Wellington Tuning weekend
« Reply #5 on: 11 May, 2013, 09:34:41 PM »
Real keen in the process of getting some iridum plugs and new leads ,where can i get a new dizzy cap and rotor? how much for a tune?

Hungry

  • Unpaid Subs Members
  • Post Whore
  • *
  • Posts: 1465
  • Gender: Male
Re: Wellington Tuning weekend
« Reply #6 on: 11 May, 2013, 11:00:59 PM »
I will be keen for a sr16ve daughterboard and tune, only current mods are gutted cat, cai but I should have n1 cams very soon! So I would be keen for a tune etc!

smx006

  • Unpaid Subs Members
  • Forum Lurker
  • *
  • Posts: 466
  • Gender: Male
Re: Wellington Tuning weekend
« Reply #7 on: 12 May, 2013, 09:52:46 AM »
Real keen in the process of getting some iridum plugs and new leads ,where can i get a new dizzy cap and rotor? how much for a tune?

You can get the dizzy cap and rotor from repco or appco but I found Nissan was cheaper. You need a daughterboard to get the tune

RUCKUS

  • Jordan
  • Unpaid Subs Members
  • Forum Lurker
  • *
  • Posts: 395
  • Gender: Male
Re: Wellington Tuning weekend
« Reply #8 on: 14 May, 2013, 02:21:53 PM »
Yeah I'm after the daughterboard and a tune. I just really need to get an exhaust set up/+the boost to 10psi/fix my waterpump hopefully I can get all that sorted before you come down, So no rush... haha

rug10

  • Unpaid Subs Members
  • Post Whore
  • *
  • Posts: 1069
  • Gender: Male
Re: Wellington Tuning weekend
« Reply #9 on: 14 May, 2013, 10:42:22 PM »
20ve daugther board on trademe 

RUCKUS

  • Jordan
  • Unpaid Subs Members
  • Forum Lurker
  • *
  • Posts: 395
  • Gender: Male
Re: Wellington Tuning weekend
« Reply #10 on: 06 June, 2013, 07:09:47 PM »
So whats the date set for this now? still keen on the DB+tune

_impulsive

  • Unpaid Subs Members
  • Forum Lurker
  • *
  • Posts: 309
  • Gender: Male
Re: Wellington Tuning weekend
« Reply #11 on: 06 June, 2013, 08:15:59 PM »
Im getting closer and closer to a stage where I am willing to shell out a grand for a Nemu. Darryl; from what I understand you can get the software free with these online, then do you just need a USB to USB cable to plug a laptop into the ECU ? I want to run a MAP sensor with it aswell, I can't really image there being much benefit of the Temp sensor on an NA motor though, correct?

R3SPCT

  • NZPPCC Paid Member
  • Part of the furniture
  • *****
  • Posts: 5029
Re: Wellington Tuning weekend
« Reply #12 on: 06 June, 2013, 10:38:54 PM »
Thinking weekend of 21 to 23 june or 28 to 30 June.

Ive got a bunch of Nemu on order, dont want to come down too early as im not sure how long they will take to get here, and have some prep to do with them for makeing some base files before i come down.

RUCKUS

  • Jordan
  • Unpaid Subs Members
  • Forum Lurker
  • *
  • Posts: 395
  • Gender: Male
Re: Wellington Tuning weekend
« Reply #13 on: 26 June, 2013, 06:52:32 PM »
still planning on coming down this weekend?

R3SPCT

  • NZPPCC Paid Member
  • Part of the furniture
  • *****
  • Posts: 5029
Re: Wellington Tuning weekend
« Reply #14 on: 26 June, 2013, 07:45:16 PM »
Only just got the nemus this week, going to try for next weekend at this stage i think, July 5/6/7.